Quick answer
Wash your rain jacket in a front-loading machine on a gentle cycle with cold water and a cleaner made for waterproof fabrics. Avoid regular detergent and fabric softener. Tumble dry on low heat to reactivate the durable water repellent (DWR) finish, or hand wash and air dry if the care label requires it.
On this page
A dirty rain jacket loses its ability to bead water and breathe, leaving you damp and uncomfortable. The good news: washing it correctly restores performance and extends its life. In this guide, we’ll walk you through how to wash a rain jacket step by step, from checking the care label to choosing the right detergent and drying method. You’ll also learn how to revive the DWR coating that keeps you dry. For tips on staying dry once you’re out there, see our guide on how to camp in the rain.
Check the Care Label First
Every rain jacket has a care label sewn inside, usually along a side seam or in a pocket. It tells you the manufacturer’s recommended washing method, water temperature, and drying instructions. Ignoring it can void the warranty or damage the fabric. Most modern waterproof/breathable jackets can be machine washed, but some ultralight or older models require hand washing. Look for symbols: a tub with a hand means hand wash only; a tub with a number indicates maximum water temperature. If the label is missing or faded, default to a gentle machine wash with cold water. Before washing, close all zippers, Velcro cuffs, and pocket flaps to prevent snagging. Remove any detachable hoods or fur ruffs if the label advises it.
Choose the Right Detergent
Regular laundry detergents contain surfactants and brighteners that leave residues, clogging the microscopic pores of waterproof/breathable membranes and destroying the DWR finish. Instead, use a cleaner specifically formulated for technical outerwear, such as Nikwax Tech Wash or Grangers Performance Wash. These rinse cleanly and help preserve water repellency. Avoid fabric softeners, bleach, and stain removers entirely, they coat fibers and attract water. If you’re washing a down-insulated rain jacket, use a down-specific cleaner to protect the loft. For a deeper dive into maintaining waterproof gear, check out our guide on how to keep a tent waterproof.
Machine Washing Your Rain Jacket
Set your washing machine to a gentle or delicate cycle with cold water and an extra rinse if available. Use a front-loading machine if possible; top-loaders with a central agitator can twist and stress the fabric. Add the recommended amount of technical cleaner, never more, as excess suds are hard to rinse out. Place the jacket in alone or with a few other synthetic items; avoid cotton, which sheds lint that clogs the membrane. After the cycle finishes, run an additional rinse cycle to remove every trace of detergent. If your machine has a ‘waterproof’ or ‘outdoor’ setting, use it. Never wring or twist the jacket to remove water; instead, gently press out excess moisture before moving to the dryer.
Hand Washing Your Rain Jacket
If the care label calls for hand washing, fill a clean sink or bathtub with cool water and add a capful of technical cleaner. Submerge the jacket and gently agitate it with your hands, paying extra attention to soiled areas like the collar and cuffs. Let it soak for 10–15 minutes, then drain the water. Rinse thoroughly with cool water until no suds remain; you may need to refill the sink several times. Avoid wringing or twisting the fabric, press the jacket against the side of the tub to squeeze out water. Hand washing is gentler on older or ultralight jackets with delicate membranes, and it’s a good option when you don’t have access to a front-loading machine.
Drying and Reactivating the DWR
Heat is essential to revive the durable water repellent (DWR) finish. After washing, place the jacket in a dryer on low or medium heat. The warmth realigns the DWR polymers on the fabric surface, restoring water beading. Check the care label first, some jackets can’t be tumble dried and must air dry. If machine drying is allowed, run the dryer for 40–60 minutes, checking periodically. If the jacket still wets out after drying, you may need to apply a spray-on or wash-in DWR treatment. For more on staying dry in wet conditions, see our guide on how to keep a tent dry in the rain.
When to Reapply DWR
Over time, even with proper washing, the factory DWR coating wears off. You’ll notice water no longer beads up and the face fabric starts to absorb moisture, a condition called ‘wetting out.’ When this happens, it’s time to reapply a DWR treatment. Choose a product compatible with your jacket’s fabric: spray-on treatments work well for spot application and breathability, while wash-in treatments cover the entire garment evenly. Follow the manufacturer’s instructions, and always clean the jacket first. After applying, heat-set the treatment in the dryer or with a cool iron (using a cloth barrier) to bond the DWR to the fibers. A fresh DWR layer keeps you dry and comfortable on the trail.
Storing Your Jacket Between Trips
Proper storage prevents mildew, creases, and premature wear. Always store your rain jacket completely dry and clean; even a little moisture can lead to mold and degrade the membrane. Hang it on a wide, padded hanger to maintain the shape of the shoulders, or fold it loosely and place it in a breathable storage bag. Avoid compression sacks for long-term storage, as they can crease the fabric and damage the DWR. Keep the jacket out of direct sunlight and away from heat sources, which can break down the waterproof coating. For more tips on managing moisture in your gear, see our guide on how to prevent tent condensation.
Frequently asked questions
Can I wash my rain jacket with regular detergent?
No, regular laundry detergents contain surfactants and brighteners that leave residues. These residues clog the waterproof/breathable membrane and strip the DWR finish, causing the jacket to wet out. Always use a cleaner specifically formulated for technical outerwear, such as Nikwax Tech Wash or Grangers Performance Wash.
How do I reactivate the DWR coating?
Tumble dry the jacket on low or medium heat. The warmth realigns the DWR polymers on the fabric surface, restoring water beading. If the care label prohibits machine drying, you can use a cool iron with a cloth barrier, but always check the manufacturer’s instructions first.
Can I put my rain jacket in the dryer?
Most modern rain jackets can go in the dryer on low or medium heat, but always check the care label first. High heat can damage the fabric or membrane. If the label says ‘line dry only,’ hang the jacket in a well-ventilated area away from direct sunlight.
How often should I wash my rain jacket?
Wash your jacket whenever it looks dirty or stops beading water. For frequent use, aim for every 10–15 outings. If you use it only occasionally, washing it once or twice a season is usually enough. Dirt and body oils degrade the DWR faster than washing does.
What if my jacket still wets out after washing?
The factory DWR coating may be worn out. Apply a spray-on or wash-in DWR treatment compatible with your jacket’s fabric, then heat-set it in the dryer or with a cool iron. For more on staying dry, see our guide on how to keep a tent dry.
Bottom line
Washing your rain jacket the right way keeps it breathable, waterproof, and ready for the next downpour. Stick to technical cleaners, gentle cycles, and low heat drying to protect the membrane and revive the DWR. A little regular care goes a long way, your jacket will perform better and last longer. Now that your gear is clean, you’re set for whatever the weather brings.