How to Use Trekking Poles

Quick answer

Using trekking poles correctly reduces joint strain and improves balance. Adjust the height so your elbow bends at 90 degrees, use the wrist straps properly, and plant the pole opposite your forward foot. Adapt your technique for flat ground, steep climbs, and descents to get the most support.

On this page
  1. Adjusting Your Poles to the Right Height
  2. How to Use the Wrist Straps
  3. The Correct Grip
  4. Walking Technique on Flat Terrain
  5. Using Poles Uphill and Downhill
  6. Common Mistakes to Avoid
  7. FAQ
  8. Bottom line

Trekking poles can transform your hike, but only if you use them right. Many hikers carry poles without knowing the proper technique, missing out on the stability and energy savings they offer. In this guide, you’ll learn how to adjust your poles for the right height, how to grip them and use the straps, and the correct planting rhythm for different terrain. Whether you’re a day hiker or a backpacker, mastering these basics will help you move more efficiently and protect your knees on the trail.

Adjusting Your Poles to the Right Height

Start by standing on level ground with your arms at your sides. Hold the pole grip and adjust the shaft until your elbow forms a 90-degree angle. This is your baseline height for flat terrain. Most poles have markings to make this repeatable. For long uphill sections, shorten the pole by a few inches so you can plant it ahead without overreaching. On steep descents, lengthen the pole to keep your body more upright and reduce stress on your knees. Always check that each section is securely locked before you start hiking.

How to Use the Wrist Straps

Wrist straps are not just for security, they transfer some of the load to your arms. Slide your hand up through the strap from below, then grasp the grip so the strap lies flat across the back of your hand. When you push down, the strap should take pressure, not your grip strength. This lets you hold the pole lightly and reduces hand fatigue. Avoid wrapping the strap around your wrist multiple times; a single, snug pass is enough. If you fall, you can release the pole quickly by opening your hand.

The Correct Grip

Grip the pole handle firmly but not tightly, with your index finger and thumb forming a relaxed circle. The handle should feel like an extension of your arm. On long hikes, vary your grip slightly to avoid cramping. Some poles have an extended foam grip below the main handle; use this when side-hilling or making short climbs without adjusting the pole length. Keep your knuckles facing forward and your wrist in a neutral position. A death grip wastes energy and can lead to blisters.

Walking Technique on Flat Terrain

On level ground, plant the pole opposite your forward foot. As your right foot steps forward, your left pole plants, and vice versa. This natural rhythm mimics your arm swing and helps maintain momentum. Keep the pole angled slightly backward so it pushes you forward rather than acting as a brake. The tip should contact the ground near your back foot’s heel. Avoid planting the pole too far ahead, which can cause you to lean forward and strain your shoulders. With practice, this alternating pattern becomes automatic.

Using Poles Uphill and Downhill

When climbing, shorten your poles and plant them slightly ahead, then push down to help propel yourself upward. Lean forward a bit from the ankles, not the waist. On descents, lengthen the poles and plant them ahead to absorb impact. Your arms act as shock absorbers, taking weight off your knees. Keep your knees slightly bent and take shorter steps. On very steep terrain, you can plant both poles at once for extra stability. Always watch your pole placement to avoid catching the tip between rocks or roots.

Common Mistakes to Avoid

One common mistake is gripping the poles too tightly, which tires your hands and arms. Another is planting the pole on the same side as your forward foot, which throws off your balance. Some hikers set their poles too long or too short, reducing their effectiveness. Also, avoid letting the poles drag behind you; each plant should be deliberate. Finally, don’t ignore the straps, they are key to efficient energy transfer. Pay attention to these details and you’ll get far more benefit from your poles.

Frequently asked questions

Do I really need trekking poles?

No, trekking poles are not essential, but they offer significant benefits. They reduce impact on your knees and ankles, improve balance on uneven terrain, and can help you maintain a steady pace. Many hikers find they can hike longer and feel less sore the next day when using poles.

Can I use one trekking pole instead of two?

Using two poles provides the best stability and symmetrical support, especially on rough trails. One pole can still help with balance and taking weight off one knee, but it may lead to an uneven gait over time. For most hikers, a pair is the better choice.

How do I know if my trekking poles are the right height?

Stand on level ground and hold the pole with the tip on the floor. Adjust the length until your elbow forms a 90-degree angle. For long climbs, shorten the pole slightly; for descents, lengthen it to avoid leaning forward too much.

Should I remove the rubber tips from my trekking poles?

Remove the rubber tips when hiking on dirt, rock, or mud so the carbide tip can grip the trail. Use the rubber tips on pavement or sensitive surfaces to prevent slipping and protect the pole tips from excessive wear.

Bottom line

Using trekking poles effectively takes a little practice, but the payoff is huge. Once you dial in the height, strap use, and planting rhythm, you’ll notice less fatigue and more confidence on uneven ground. Start with these techniques on your next hike and adjust as you go, your knees will thank you.