How to Rewaterproof a Rain Jacket

Quick answer

To rewaterproof a rain jacket, clean it thoroughly, then apply a durable water repellent (DWR) treatment, either spray-on or wash-in, and heat-activate it according to the product instructions. This restores the jacket's ability to shed water and keeps you dry.

On this page
  1. Why rain jackets lose their waterproofing
  2. How to check if your jacket needs rewaterproofing
  3. Preparing your jacket: washing and drying
  4. Choosing and applying a DWR treatment
  5. Heat activation and final checks
  6. Maintaining breathability after rewaterproofing
  7. FAQ
  8. Bottom line

A reliable rain jacket is your first line of defense when camping in the rain, but even the best jackets lose their water-shedding ability after months of use. Dirt, body oils, and abrasion wear down the durable water repellent (DWR) finish, causing the face fabric to wet out. When that happens, the jacket feels clammy and stops breathing. The good news: you can bring it back to life with a simple rewaterproofing process. In this guide, we'll walk you through how to rewaterproof a rain jacket step by step, from washing to applying a fresh DWR treatment and reactivating it with heat.

Why rain jackets lose their waterproofing

Rain jackets rely on a DWR coating that makes water bead up and roll off. Over time, dirt, sweat, and friction from pack straps degrade this coating. The waterproof membrane underneath still blocks water, but a wetted-out face fabric stops breathability, leaving you feeling damp. Regular cleaning and reapplication keep the jacket performing like new. Just as you'd maintain a tent's waterproofing, your jacket needs similar care. For more on that, see our guide on keeping your tent waterproof.

How to check if your jacket needs rewaterproofing

If water soaks into the fabric instead of beading, the DWR is gone. A quick check: spray or splash water on the shoulders and sleeves. If it wets out within seconds, it's time to rewaterproof. This simple check is as important as knowing how to keep your tent dry when camping in wet conditions. For a deeper dive, read our article on keeping your tent dry.

Preparing your jacket: washing and drying

Start by closing all zippers and fastening any hook-and-loop closures. Use a technical cleaner designed for waterproof gear; regular detergent can leave residues that interfere with DWR. Wash on a gentle cycle with an extra rinse to remove all soap. Do not use fabric softener. After washing, dry the jacket completely in a tumble dryer on low heat or air dry it. A clean surface ensures the new DWR bonds properly.

Choosing and applying a DWR treatment

Spray-on DWR lets you target high-wear areas like shoulders and hood, while wash-in treatments coat the entire jacket evenly. For a quick refresh, spray-on is convenient. For a full restoration, wash-in is thorough. Apply either treatment to a clean, damp jacket according to the product's instructions. Work in a well-ventilated area and avoid oversaturating. Both methods work well; your choice depends on the jacket's condition and your preference.

Heat activation and final checks

Heat is essential to activate most DWR formulas. After applying the treatment, tumble dry the jacket on a low or medium setting for the time specified on the DWR bottle. If the care label allows, you can also use a cool iron with a cloth between the iron and the fabric. Once activated, check the beading with a splash of water. The jacket should shed water instantly, confirming the DWR is working.

Maintaining breathability after rewaterproofing

A properly restored DWR keeps the face fabric dry, allowing sweat vapor to escape. If the jacket feels clammy after treatment, you may have used too much product or skipped the heat step. Breathability is key to comfort, much like preventing tent condensation ensures a dry night's sleep. Avoid fabric softeners and harsh detergents in future washes, and reapply DWR as soon as water stops beading to maintain peak performance.

Frequently asked questions

How often should I rewaterproof my rain jacket?

It depends on use, but generally every 10-15 outings or when water stops beading. Frequent washing with technical cleaners can extend the time between treatments. For more on staying dry, see our guide on how to keep a tent dry in the rain.

Can I use a waterproofing spray on other gear?

Yes, many spray-on DWR treatments work on tents, backpacks, and softshells. Always check the product label to ensure compatibility with the fabric, and avoid treatments containing silicone on breathable membranes.

Will rewaterproofing fix a leaking jacket?

No. Rewaterproofing restores the DWR on the outer fabric, but it won't repair a damaged waterproof membrane or taped seams. If your jacket leaks through the membrane, it may need professional repair or replacement.

Does washing remove the DWR?

Washing with a technical cleaner helps maintain DWR by removing dirt that degrades it. However, using regular detergent or fabric softener can strip the DWR and reduce its effectiveness. Always follow the jacket's care label.

Bottom line

Rewaterproofing your rain jacket is a straightforward process that restores its performance and extends its life. With regular cleaning and timely DWR renewal, you'll stay dry and comfortable on every adventure. Don't wait until you're soaked, make it part of your gear maintenance routine.