Quick answer
To measure torso length for a backpack, find the C7 vertebra (the knobby bone at the base of your neck) and the iliac crest (the top of your hip bones). With a flexible tape measure, have someone measure the distance between these two points along the curve of your spine. That number is your torso length.
On this page
A backpack that doesn't fit can turn a dream trip into a painful slog. The key to proper fit is your torso length, not your height. This guide walks you through measuring your torso length accurately, so you can choose a pack that carries comfortably all day. You will learn the two bony landmarks to find, how to take the measurement with a friend's help, and how to match that number to pack sizes.
Why torso length matters more than height
Backpack fit revolves around the hip belt. To transfer weight off your shoulders, the belt must wrap around the top of your hips, and the shoulder straps should anchor at the point where the pack's frame ends near your neck. Torso length determines where that anchor sits. If the pack is too long, the shoulder straps hover above your shoulders and the hip belt sits too low. If it is too short, the belt rides up and the straps dig in. Neither scenario works for long miles. Measuring your torso ensures the pack's suspension matches your body, not your overall height, because two people of identical height can have very different torso lengths.
What you need before you start
Grab a flexible tailor's tape measure, not a rigid ruler. You will also need a friend, measuring yourself twists your spine and changes the result. Wear thin clothing so the landmarks are easy to feel. Stand up straight with feet shoulder-width apart, and tilt your head slightly forward to expose the bump at the back of your neck. Keep the tape measure flat against your back, following the curve of your spine, not a straight vertical line. A belt or string tied around your waist can help mark the iliac crest line before you start.
Locating the C7 vertebra
Bend your head forward, chin to chest, and run your fingers down the back of your neck until you feel a prominent bump. That is the C7 vertebra, the lowest bone of the cervical spine. It sticks out more than the others. Have your friend mark the spot with a small piece of tape or just remember it. The measurement starts at the bony tip of C7, not higher on the neck. This spot is where the top of a properly fitted pack's frame and shoulder straps should sit, so being precise here pays off.
Finding the iliac crest
Reach back with your thumbs and find the top ridge of your pelvis, just above your hips. This is the iliac crest, where your thumbs naturally rest. The measurement ends right between the tops of the two crests, roughly at the same height as your belly button on the front. Ask your friend to find the same spot on each side and imagine a horizontal line connecting them across your back. The tape measure will stop at the midpoint of that line. This is where the hip belt should wrap around you, centered on the bony ridge.
Taking the measurement
With both landmarks identified, have your friend hold the start of the tape at C7 and run it down along your spine, following every curve, until it reaches the horizontal line between the iliac crests. Do not pull it tight enough to compress skin or clothing. Read the number in inches or centimeters. This is your torso length. Take two or three readings to be sure, minor posture changes can shift the result by a fraction of an inch. The most repeatable measurement is the one to use.
Matching your measurement to pack sizes
Backpack manufacturers publish torso size ranges, often split into small, medium, and large. A given torso length might fall into a medium range according to one brand, while another brand maps the same measurement to a small. Always check the specific chart because sizing varies. If you are between sizes, try both if possible, but lean toward the larger option: a pack that is a hair long can often be adjusted shorter via load-lifter straps and belt position, while a pack that is too short leaves the hip belt above your hips with little room for correction.
Common measuring mistakes to avoid
Many people measure straight down their spine like a plumb line, but the tape must follow the natural curve of the back. Another mistake is using a fabric tape that stretches, which adds length. Standing hunched over or bending your knees also changes the distance. And finally, don't assume that because you are tall you have a long torso, or that being short means you need an extra small pack. Leg-to-torso proportions vary widely, which is exactly why you measure. Always remeasure before buying a new pack, your body can change, and different pack styles may fit differently.
Frequently asked questions
What is torso length on a backpack?
Torso length is the distance between the C7 vertebra at the base of your neck and the iliac crest at the top of your hip bones. It determines how a backpack's frame will align with your body.
Can I measure my torso length by myself?
You can get a close estimate by using a flexible tape measure and a mirror, but it is more accurate to have a friend help you locate the landmarks and hold the tape straight.
What if my torso measurement falls between two sizes?
It is usually better to size up. A pack that is slightly too long can often be adjusted down, while a pack that is too short is harder to fix and may sit uncomfortably on your shoulders.
Does clothing affect torso measurement?
Yes, bulky clothing like a puffy jacket or thick fleece can compress when the pack is tightened, effectively adding a small amount to your torso measurement. Measure while wearing what you will typically wear on the trail.
Bottom line
Once you know your torso length, you can shop for backpacks with confidence. Keep in mind that brands size packs differently, so always consult the manufacturer's size chart. A pack that matches your measurement will put weight on your hips, not your shoulders, and make long days on the trail much more comfortable.