Quick answer
Attach trekking poles to a backpack using side compression straps, dedicated pole loops, or daisy chains. Insert the tip into a bottom loop or pocket, secure the handle under a cinched side strap, or hang the wrist strap from a carabiner on your shoulder harness. The goal is a snug, snag-free carry that keeps your hands completely free for scrambling, map reading, or using trekking cameras.
On this page
When the trail flattens out or the next section demands both hands for a scramble, trekking poles quickly become awkward extras. Rather than holding them in your teeth or leaving them behind, you can attach them to your pack in seconds. This guide walks you through several secure methods that work with nearly any hiking backpack, using the straps and loops already built into your gear. By the end, you will know how to lash your poles so they stay put, resist snags, and are back in your hands the moment you need them.
Why attach trekking poles to your backpack?
Trekking poles save your knees on descents and give you an extra push on climbs, but they become a hindrance when you need your hands for scrambling, adjusting gear, or checking a map. Attaching them to your pack instead of setting them down means you never leave them behind. A secure carry also prevents the poles from swinging into your legs or catching on branches. Most methods take only a few seconds and can be done without removing the backpack, so you can switch smoothly between hiking and hands-free mode.
Finding the attachment points on your pack
Nearly every backpack designed for hiking includes attachment points. Look for side compression straps (the webbing straps often used to cinch the pack smaller), vertical daisy chains on the front panel, tool or ice axe loops near the bottom, and small gear loops along the sides. Many daypacks also have a dedicated pole carry system like a bungee cord and hook. Even a simple school-style pack with a side mesh pocket and a cinch cord can work as a bottom anchor for the pole tips.
Method 1: using side compression straps
Slide the pole tips into the bottom side pocket or through a bottom tool loop if your pack has one. Flatten the poles against the side of the pack, then release the side compression strap and cinch it over the pole handles. Tighten until the poles cannot shift, keeping the basket at the top to avoid catching on brush. If your pack has two straps on that side, secure both the handle and the middle of the shaft for extra stability. Always point the tips down so they don't snag overhead branches.
Method 2: daisy chains and gear loops
Daisy chains (rows of webbing loops sewn vertically) offer flexibility for carrying poles without side straps. Insert the pole tips into a bottom loop or a gear loop at the pack's base. Then take a small carabiner or a hook, attach it to a higher daisy chain loop, and clip the pole wrist straps into it. Alternatively, run a shock cord through a daisy chain, wrap it around the pole handles, and hook it back to itself. Centering the poles on the front of the pack keeps them from swinging and balances the load.
Method 3: dedicated shoulder-strap carry
Many modern backpacks and trekking poles have a built-in quick-carry system. A small loop or elastic hook at the shoulder strap holds the pole handle, while a bungee at the hip belt secures the tip. If your pack lacks this, you can sew a loop of webbing to your shoulder strap. Attach a small carabiner to your sternum strap, clip the pole wrist straps, and let the poles hang vertically. This setup offers instant access without removing the pack, perfect for technical sections where you need to switch often.
Keeping the poles stable and snag-free
Even a well-placed pole can work loose after a few minutes of hiking. After attaching, give the pack a gentle shake to check for movement. Use a second strap or a bungee to cinch the shafts if they wag. When carrying two poles, link the wrist straps together before securing them so they move as one unit. For overgrown trails, stow the poles completely inside the pack or lash them centrally under the main compression straps. Re-check the attachment any time you take a break or adjust the pack.
Frequently asked questions
Can I attach trekking poles to any backpack?
Yes. Any pack with at least one side compression strap, a daisy chain, or even a cinch-top water bottle pocket can hold trekking poles. If your pack lacks obvious loops, a couple of carabiners and a piece of shock cord can create a secure attachment in minutes.
How do I attach trekking poles without side straps?
Loop a length of shock cord through the lowest gear loop or through the pack's bottom front loops, then criss-cross it over the pole handles and hook it to an upper daisy chain or an accessory loop. A simple bungee-and-hook system works on almost any pack, even one without side straps.
What is the best way to carry trekking poles when scrambling?
The fastest access method is a shoulder-strap carry. Slide the handle into a dedicated loop on your shoulder strap (or use a small carabiner), then let the tips hang into a bungee loop near your hip belt. The poles stay vertical and out of the way, yet you can grab one in seconds when the terrain changes.
How do I keep my trekking poles from snagging on branches?
Always point the tips downward and keep the poles flush against the pack. Use a secondary strap or a bungee to hold the shafts tight against the pack body. If you're bushwhacking, stow the poles inside the pack or lash them centrally along the spine under the compression straps, tips covered.
Bottom line
With a few simple techniques, you can attach trekking poles securely to any backpack. Whether you rely on side straps, daisy chains, or a DIY bungee system, the key is keeping the poles stable, accessible, and out of your way. The next time a scramble or a map check calls for free hands, you'll be ready without losing time or momentum on the trail.